Janitza 800-CT24 handleiding
Handleiding
Je bekijkt pagina 35 van 60
www.janitza.com
35
800-CT24 module
8.2 Module communication options
8.2.1 Module handling in the GridVis
®
software
The user interface of the GridVis
®
network analysis
software uses a graphical representation to show the
modules connected to the basic device.
A user can configure various types of module han-
dling in the GridVis
®
software, including:
· Automatic module recognition
· Module addition at the end of the module topology
of a basic device.
· Module addition within the module topology of a
basic device.
· Module removal at the end of the module topology
of a basic device.
· Module removal within the module topology of a
basic device.
· Module swap.
· Module configuration swap (measurement).
· Data storage and data transfer.
· Swap out basic device.
8.2.2 Basic device homepage
Another option for configuring modules or reading
out measured values is available via the device
homepage of the basic device.
A description of the device homepage can be
found in the user manual for the basic device!
A description of how to configure the modules in
the GridVis
®
software
can be found in the online
help or the tutorials for the software.
Observe the usage information for your HMI as
applicable!
8.2.3 Module handling via a user interface
(HMI)
As a 3rd option, you can manage, monitor and
configure your modules via a web panel (e.g. JPC-
100) integrated into your measurement device and
module topology as a user interface (HMI) - see Sect.
“8.1.1 Connection example 1” on p. 32.
Bekijk gratis de handleiding van Janitza 800-CT24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CT24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9037 MB |
