Janitza 800-CT24 handleiding
Handleiding
Je bekijkt pagina 29 van 60
www.janitza.com
29
800-CT24 module
ESC
Duration
Confirm Ok
30
Identify all modules
ESC
Duration
Confirm Ok
30
Module position
1
Identify single module
7.4.1 Entry "Identify one module”
· In the Diagnostics window, use buttons 2 “5” and
5 “6” to select the menu item Identify one module
and confirm with button 3 Enter.
· The Identify one module window appears.
Fig. Window: Identify one module
· In the Identify one module window, use keys 2 “5”
and 5 “6” to select the menu item Module position
and confirm with key 3 Enter.
· The entry Module position blinks.
· Use the keys 2 "5" and 5 "6" to enter the position
number of the module to be identified (the position
number depends on the number of modules con-
nected in series to the basic device).
· Confirm the entry with key 3 Enter.
· Use keys 1 ESC and key 5 "6" to access the entry
Duration.
· Press button 3 Enter.
· The first digit of the entry Duration blinks.
· Use buttons 4 () and 6 () to change the position
of the digit to be set and buttons 2 (5) and 5 (6) to
change the digit (-1/+1).
· Confirm your entries with key 3 Enter.
· Use keys 1 ESC and key 5 "6" to access the entry
Confirm.
· Press button 3 Enter.
· In the entry Confirm, OK blinks.
· Pressing button 3 Enter starts the module iden-
tification with a blink interval of the LEDs on the
corresponding module (see Sect. “7.4.3 Module
identification - LED blink interval” on p. 30).
Position of the module in
the order of the basic de-
vice’s module topology.
Time in s that the module
identification takes
(setting range 0-600s)
Starts the module
identification
(LEDs blink)
7.4.2 Entry “Identify all modules”
· In the Diagnostics window, use buttons 2 “5” and
5 “6” to select the menu item Identify all modules
and confirm with button 3 Enter.
· The window Identify all modules appears.
Fig. Window, Identify all modules
Time in s that the module
identification takes
(setting range 0-600s)
Starts the module
identification
(LEDs blink)
· In the Identify all modules window, use buttons 2
“5” and 5 “6” to select the menu item Duration
and confirm with button 3 Enter.
· The first digit of the entry Duration blinks.
· Use buttons 4 () and 6 () to change the position
of the digit to be set and buttons 2 (5) and 5 (6) to
change the digit (-1/+1).
· Confirm your entries with key 3 Enter.
· Use keys 1 ESC and key 5 "6" to access the entry
Confirm.
· Press button 3 Enter.
· In the entry Confirm, OK blinks.
· Pressing button 3 Enter starts the identification of
all modules using a blink interval of the LEDs (see
Sect. “7.4.3 Module identification - LED blink inter-
val” on p. 30).
Bekijk gratis de handleiding van Janitza 800-CT24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CT24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9037 MB |
