Janitza 800-CT24 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Afdrukken

Je bekijkt pagina 16 van 60

800-CT24 module www.janitza.com

16

3.5 EU/UKCA Declaration of Conformity

Please see the EU/UKCA declarations of conformity

posted at www.janitza.com for the laws, standards

and directives applied by Janitza electronics GmbH

for the devices. The EU/UKCA conformity of the

device permits the marking CE/UKCA.

3.6 FCC Declaration of Conformity

The device

· complies with Part 15 of the FCC Rules for Class

B digital devices (limits to protect against harmful

interference in a residential installation).

· generates, uses and can radiate high-frequency

energy

· can cause harmful interference to radio communi-

cations if not installed and used properly. There is

no guarantee that interference will not occur in a

particular installation.

If there is radio or television reception interference,

which can be determined by turning the device on

and off, proceed as follows:

· Align or reposition the receiving antenna.

· Increase the distance between the device and the

radio/television receiver.

· Connect the device and the radio/television receiver

in different circuits.

· if necessary, contact Janitza support or a radio/tele-

vision technician.

Code of Federal Regulations, Title 47, Part 15, Sub-

part B - Unintentional Radiators.

3.7 Protective device/transformer

It is not permitted to use the outputs of Janitza

measurement devices, components and modules for

switching protective devices or protective relays! Use

only "Current transformers for measuring purposes"

for Janitza measurement devices, components and

modules!

3.8 Scope of delivery

Quan-

tity

Part. no. Designation

1 52.31.213

Module 800-CT24

(current measuring module)

1 33.03.887 Installation manual (DE/EN)

1 33.03.342 "Safety Information" supplement

Tab. Scope of delivery, 800-CT24 current measuring module

INFORMATION

· The modules are delivered with the necessary

screw terminals and bus connectors (JanBus in-

terface) for connection to the basic device or other

modules.

· All supplied options and design variants are de-

scribed on the delivery note.

· The GridVis

®

network analysis software is available

at www.janitza.com and can be used to configure

your basic device with modules and read out data

for analysis (prerequisite: PC connection to your

basic device).

3.9 Accessories

Quantity Part. no. Designation

1 52.31.242

Module 800-CON-RJ45

(transfer module)

1 10.01.953 End bracket

LP current transformer with secondary

voltage 0 .. 333mV

(length of the connecting cable)

1 15.03.124

LP current transformer up to 50A

(primary current) (2m)

1 15.03.125

LP current transformer up to 75A

(primary current) (2m)

1 15.03.126

LP current transformer up to 100A

(primary current) (2m)

1 15.03.127

LP current transformer up to 50A

(primary current) (0.25m)

1 15.03.128

LP current transformer up to 75A

(primary current) (0.25m)

1 15.03.129

LP current transformer up to 100A

(primary current) (0.25m)

Table of available accessories for 800-CT24 current measuring

module

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Bekijk gratis de handleiding van Janitza 800-CT24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Janitza (Niet gecategoriseerd)

Handleiding bekijken

Janitza 800-CT8-LP

Niet gecategoriseerd - handleiding

Handleiding bekijken

Janitza 800-CON-RJ45

Niet gecategoriseerd - handleiding

Handleiding bekijken

Janitza 800-DI14

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd