Janitza 800-CON-RJ45 handleiding
Handleiding
Je bekijkt pagina 20 van 36
Module800-CON-RJ45 www.janitza.com
20
5. Connections/controls
5
Item Designation Description
1 Module name Module designation
2 JanBus interface (Out)
RJ45 interface via RJ45 cable (RJ45 patch cable) for forwarding JanBus
communication to remote measurement points.
3 JanBus interface (In)
Connection contacts for the output bus connector (item 6) or input bus
connector (item 7).
4 Bottom bolts For mounting the module on the DIN rail.
5
Output bus connector
(JanBus interface)
Contacts for insertion into the basic device or an attached module.
6
Output bus connector
(JanBus interface)
Sockets for the connection contacts on the back of the module (item3).
7
Input bus connector
(JanBus interface)
Sockets for the connection contacts on the back of the module (item3).
8
Input bus connector
(JanBus interface)
Sockets for inserting bus connector contacts of other modules.
INFORMATION
The scope of delivery of the 800-CON-RJ45 transfer
module includes one input and one output bus con-
nector each, so that each transfer module can be used
with the corresponding bus connector at the output or
input of a measurement device and module series (see
Sect. “4. Mounting” on p. 16 and Sect. “6. Installa-
tion” on p. 22).
Front view Bottom view Rear view
Output bus connector
2HP (horizontal pitches),
top view
1
2
3
4
4
5.1 Designation and description
Input bus connector
2HP (horizontal pitches),
top view
6
7
8
INFORMATION
Suitable modules for a JanBus meter and module
topology can be found in Sect. “3.9 Accessories” on
p. 14.
Bekijk gratis de handleiding van Janitza 800-CON-RJ45, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CON-RJ45 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5042 MB |
