JANDY CD100 handleiding

24 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 24
Page 23
Jandy
®
Pro Series Ozone Generator
PROBLEM REASON SOLUTION
Module indicator
lights not lit when
pool system is on
No power to the
ozone generator from
the power source
Check circuit breaker at the
power distribution box.
Check for loose connections or
wiring breaks from the power
distribution box to the generator.
The fuse in the unit
has blown
Replace fuse with a glass, .25” x
1.25”, 1 amp, slo-blo type
G.F.C.I. has tripped. Check power cord and reset
G.F.C.I.
Flow meter not
indicating flow
Injector not supplying
adequate suction
Check pump, filters, and
skimmers to ensure water is
flowing through injector.
Ensure that there is no debris
clogged inside the injector.
Tubing is impaired Check for kinks or clogs.
Check for cracks or cuts.
Check connections.
Check that the gas line check
valve is installed with the arrow
pointing towards the injector.
Be sure that the gas line check
valve has not become fouled with
debris. Disconnect the Ozone
Tube from the injector. With the
pump running, cover the end
of the injector with your thumb,
and feel for suction. If there is
sufficient suction without the gas
line check valve, replace the gas
line check valve with a new one.
Ozone Tube
becomes yellow/
brown and brittle
It is normal for high
concentration of
ozone, as well as
exposure to UV
sunlight to deteriorate
the ozone tube
Replace the ozone tube and gas
line check valve every year.
In between annual maintenance,
check for cracks or leaks and
replace as necessary.
Ball for flow
reading is not
in center of flow
meter
Flow meter provides a
general guideline only
and flow will vary with
differing pressures
through the injector
or affected by filter,
strainer loading, etc.
If ball is moving, ozone generator
can perform well at flows above
and below recommended range.
Check the strainer for clogging.
Check the filter.

Bekijk gratis de handleiding van JANDY CD100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkJANDY
ModelCD100
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2422 MB