Jackson DynaStar handleiding
Handleiding
Je bekijkt pagina 22 van 86
07610-004-66-53-F
15
Proper ware preparation will help ensure good results and fewer re-washes. If not
done properly, ware might not come out clean and eciency of the machine will
be reduced. Putting unscraped dishes into the machine aects its performance, so
always remove scraps from ware before loading into a rack. Pre-rinsing and pre-
soaking are good ideas, especially for silverware and casserole dishes. Place cups
and glasses upside-down in racks so they don't hold water during the cycle. The
machine sanitizes as well as cleans, so always properly prepare ware before loading
in the machine.
Refer to Preparation section and follow instructions there. Afterward, ensure that
chemicals are supplied to the machine. If not, contact your chemical supplier.
When the machine is rst powered on for the day/shift, wash tank water must reach
set temperature before being operated:
1. Ensure door is closed.
2. Press power button.
3. Machine will ll automatically.
4. Display will show “Heating” until wash tank reaches set temperature.
1. Ensure wash tank temperature has reached set temperature and display
shows "Ready."
2. Open door.
3. Slide a loaded rack of ware into the machine.
4. Close door. Cycle begins automatically and cycle light comes on.
5. At end of cycle, cycle light will turn o.
6. Open door and remove rack.
WARE
PREPARATION
WASHING A RACK
OF WARE
DAILY MACHINE
PREPARATION
OPERATING INSTRUCTIONS
OPERATION
HEATING
CYCLE 1
125
F
150
F
READY
CYCLE 1
Bekijk gratis de handleiding van Jackson DynaStar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DynaStar |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12043 MB |
