Jackson DynaStar handleiding
Handleiding
Je bekijkt pagina 21 van 86
07610-004-66-53-F
14
OPERATING INSTRUCTIONS
OPERATION
Before operating the machine, verify the following:
1. Pan strainers and suction strainer are in place and are clean.
2. Standpipe and o-ring are installed.
3. Wash and rinse arms are screwed securely into place and end-caps are tight.
Wash and rinse arms should rotate freely.
To energize the machine, turn on power at service breaker. Voltage should have been
previously veried as correct. If not, verify voltage.
Press power button and display will come on. The machine will ll with water
automatically until appropriate water level is reached (just below pan strainers). Wash
tub must be completely lled before operating wash pump to prevent damage to
components.
PREPARATION
POWER UP
FILLING THE
WASH TUB
Power Button
Bekijk gratis de handleiding van Jackson DynaStar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DynaStar |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12043 MB |
