Jackson DishStar ADA-SEER handleiding
Handleiding
Je bekijkt pagina 27 van 60
07610-004-99-71-B
20
TROUBLESHOOTING
SETPOINTS
CHANGING
TEMPERATURE
SCALE
3. Once desired temperature is selected, press and hold cycle button for a
minimum of three seconds and no more than six seconds (after three seconds
rinse temperature will stop ashing). Release cycle button to accept and move
to next setting (temperature scale).
1. Once setting changes to temperature scale, °F or °C will ash on and o.
2. Push prime button up or down to toggle between °F and °C on left display, right
display will be blank.
3. Once desired temperature scale is selected, press and hold cycle button for a
minimum of three seconds and no more than six seconds (after three seconds
temperature scale will stop ashing). Release cycle button to accept and move
to next setting (back to wash temperature).
4. To exit setpoints at any time, hold cycle button for a minimum of six seconds.
Display will stop ashing and return to wash temperature. The machine is ready
to operate.
190
°
F
ADJUSTING
RINSE TEMP
SETPOINT
°
F
°
C
If there is no activity
(button presses) for 30
seconds, display will exit
setpoints mode without
saving changes.
155
°
F
155
°
F
Bekijk gratis de handleiding van Jackson DishStar ADA-SEER, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DishStar ADA-SEER |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7542 MB |
