Jackson Conserver XL-HH handleiding
Handleiding
Je bekijkt pagina 24 van 64
07610-003-92-84-P
18
The rst rack of ware that you place into the unit can have the effect of quickly
reducing the temperature of the wash tank. This is because you are introducing
cold materials into the dishmachine and the unit has to circulate water to activate
the heating cycle. You might have to run the rst rack through the unit again. Any
time the unit has not been operated for an extended period of time this is possible,
but unlikely. This is usually dependent on the type of ware you are using, its
temperature, and the ambient temperature of the kitchen area. To ensure proper
operation, always observe the temperatures of the wash and rinse when rst
starting the unit.
Proper preparation of ware is essential for the smooth, efcient operation of your
dishmachine. If done properly, you can expect to have fewer re-washes and use
substantially less detergent. Any ware placed inside the machine should have all
solid food waste and scraps removed. It is recommended that ware also be sprayed
down before being placed in the dishmachine.
Place cups and glasses upside-down in racks so they don't hold water during the
cycle. Presoak atware in warm water to assist in removing food. Load plates and
saucers in the same direction, with the food surface facing the unload end of the
machine.
To wash a rack, open the door completely (avoid hot water dripping from the doors)
and slide the rack into the unit. Close the doors and the unit will start automatically.
Once the cycle is completed, open the door (again careful of the dripping hot water)
and remove the rack of clean ware. Replace with a rack of soiled ware and close the
doors. The process then repeats itself.
Based upon usage, the pan strainer might become clogged with soil and debris
as the workday progresses. Operators should regularly inspect the pan strainer to
ensure it has not become clogged. If the strainer becomes clogged, it will reduce the
washing capability of the machine. Instruct operators to clean out the pan strainer at
regular intervals or as required by workload.
FIRST RACK
WARE
PREPARATION
WASHING A
RACK OF WARE
OPERATIONAL
INSPECTION
OPERATING INSTRUCTIONS
OPERATION
3. Verify that the drain stopper is preventing the wash tub water from pouring out
excessively. There might be some slight leakage from the drain hole. Verify that
there are no other leaks on the unit before proceeding any further.
4. The wash tub must be completely lled before operating the wash pump to
prevent damage to components.
5. Once the wash tub is lled, the unit is ready for operation.
FILLING THE
WASH TUB
On the XL-E-LTH, choose
the Normal, Medium,
or Heavy cycle before
opening the door.
Bekijk gratis de handleiding van Jackson Conserver XL-HH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | Conserver XL-HH |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9956 MB |
