Jackson Conserver XL-HH handleiding
Handleiding
Je bekijkt pagina 23 van 64
07610-003-92-84-P
17
Operating
Range
Before operating the unit, verify the following:
1. The sump strainer and pan strainer are in place and clean.
2. The drain stopper is installed.
3. The wash/rinse arms are installed and secure.
To place the unit in standby, ip the "OFF/ON/FILL" switch to the ON position.
PREPARATION
POWER UP
FILLING THE
WASH TUB
OPERATING INSTRUCTIONS
OPERATION
1. For the initial ll (installation or beginning of day), close the door and depress
and hold the "OFF/ON/FILL" switch in the FILL position for approximately 8-10
seconds.
2. Open the door and verify water level is correct. Water must be between the lines
on the drain stopper. For lowest energy use, water should be at the lowest line
on the drain stopper. This is only necessary during the initial ll. After this, the
water level is controlled by the timer.
If water level needs
adjusted, see the
CAM Timer Operation
section and follow the
instructions for CAM 5.
Lowest
Energy
Usage
Highest
Energy
Usage
Bekijk gratis de handleiding van Jackson Conserver XL-HH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | Conserver XL-HH |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9956 MB |
