Jackson Conserver XL-HH handleiding
Handleiding
Je bekijkt pagina 13 van 64
07610-003-92-84-P
7
All electrical ratings provided in this manual are for reference only. Always refer to the machine data plate to get exact
electrical information for this machine. All electrical work performed on machines should be done in accordance with
applicable local, state, territorial, and national codes. Work should only be performed by qualied electricians and
authorized service agents.
Note that all electrical wiring used in this series of machines must be rated, at a minimum, for 212 °F (100 °C), and that only
copper conductors must be used.
Where applicable, heating element amperage draws have been adjusted for the assumed input voltage. The manufacturer
assumes incoming voltages will be either 115, 208, 230, or 460 Volts. Some heating elements used in the machines are rated
for other voltages, such as 240 Volts and 480 Volts. Always verify the amperage draw of the machine in operation when
sizing circuit protection.
Available Electrical Characteristics:
Conserver
®
XL-E/XL HH
Electrical Characteristics
VOLTS 115 208
PHASE 1 1
FREQ 60 60
WASH
MOTOR
AMPS
10.0 A 5.0 A
TOTAL
LOAD
10.0 A 5.0 A
NOTICE
i
SPECIFICATIONS
ELECTRICAL REQUIREMENTS
Conserver
®
XL-E-LTH
Electrical Characteristics
VOLTS 208 230 208 230
PHASE 1 1 3 3
FREQ 60 60 60 60
WASH
MOTOR
AMPS
5.0 A 5.0 A 5.0 A 5.0 A
RINSE
HEATER
AMPS
43.3 A 47.8 A 25.0 A 27.7 A
TOTAL
LOAD
48.3 A 52.8 A 30.0 A 32.7 A
Bekijk gratis de handleiding van Jackson Conserver XL-HH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | Conserver XL-HH |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9956 MB |
