Ixxat CAN@net II/VCI handleiding
Handleiding
Je bekijkt pagina 7 van 22
CAN@net II - Manual, V2.0
Installation
7
2 Installation
2.1 Software Installation
To operate the CAN@net II/VCI interface, a driver is required. This driver is part
of the VCI (Virtual CAN Interface), which can be downloaded for free from the
HMS website (www.ixxat.com
).
For the installation of the CAN driver VCI under Windows, please refer to the
VCI installation manual.
For the CAN@net II/Generic bridge mode, the devices must be configured. This
is described in detail in the CAN@net II/Generic manual.
2.2 Hardware Installation
The CAN@net II device needs a power supply and an Ethernet connection.
There is no further hardware installation necessary.
The CAN@net II can be plugged and unplugged during operation of the PC (hot-
plug compatible).
It is recommended to install the VCI software before plugging in for the first time.
Bekijk gratis de handleiding van Ixxat CAN@net II/VCI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ixxat |
| Model | CAN@net II/VCI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4008 MB |
