Irradio IR-PS60 handleiding
Handleiding
Je bekijkt pagina 22 van 60
Light effects:
Button (11) switches between four light play patterns displayed on the front in the area around the speaker:
press it repeatedly to change the pattern according to your taste, while the display shows the corresponding
selection with a number varying from 1 to 4. To switch off the light effects, press and hold button (11) for a
few seconds; to switch them back on after shut-down, press button (11) briefly.
Equalisation:
The EQ button (8) switches between four pre-configured musical pitch settings. Press it repeatedly to change
the sound to the pitch that best suits the sound being played, while the corresponding selection is shown
on the display, with a number ranging from 1 to 4. The “Eq1” setting corresponds to natural sound without
equalisation.
Shut-down:
To switch off the appliance, briefly press the button (10). When switching off, the appliance emits a
confirmation sound; to restart the appliance after shut-down, briefly press the button (10). The appliance
switches itself off after a considerable period of inactivity.
Recharging the battery:
The appliance signals that the built-in battery needs charging with a specific announcement, recurring if
applicable. To carry out this operation in the best possible way, keep in mind that:
• The appliance must be charged as soon as possible when the need is signalled: excessive use with a
discharged battery can compromise subsequent recharges and reduce the efficiency of the battery.
• It is best not to use the appliance during charging, as doing so could cause charging to take a long time
or even be ineffective.
• Charging must not be interrupted if possible.
• Charging in progress is indicated by the LED to the right of the USB-C connector (6) lighting up red:
charging is complete when the LED switches off.
• Ideal charging is carried out with a high-powered charger, such as for tablets, i.e. with a current of at
least 2 amps: charges with lower currents are generally inadvisable because they could cause partial
charging of the battery, as well as take a long time.
• Charging from the USB port of a PC is usually very slow.
To start charging, simply connect the supplied cord to the USB-C socket (6) via the small connector, then
connect the large connector to a 5V voltage source with USB socket. Make sure charging has started by
checking the LED, which must turn red; if the LED remains off even with the cable connected, please refer
to chapter 7 below.
6. CLEANING AND MAINTENANCE
The appliance does not require maintenance, understood as the replacement of consumables (except for
the batteries of the wireless microphone, as explained in the previous chapter) or scheduled servicing;
periodic removal of dust with a dry cloth suitable for the function is sufficient. Every cleaning operation must
absolutely be carried out with the appliance switched off: the use of a cloth that is too damp or any atomised
detergent must be avoided given the presence of a non-separable battery and given the possibility that
certain voltage points may be reached by liquids. Even if stains or accumulations of dirt must be removed,
proceed without wetting or soaking the appliance: in any case, avoid aggressive detergents, abrasive
sponges, iron wool or other chemical cleaners.
Bekijk gratis de handleiding van Irradio IR-PS60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Irradio |
| Model | IR-PS60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8129 MB |
