IOGEAR GCS1218TAA3 handleiding
Handleiding
Je bekijkt pagina 20 van 36
20
Hardware Setup
6. Connect the USB Smart Card / CAC reader to the CAC port on the front panel of IOGEAR Secure
KVM Switch
5. With the other end of the KVM cable set, connect the USB, video, and speaker cables into their
respective ports on the computers.
Note:
1. On Dual View (dual display) KVM installation, please verify that the second Video
connection is in the same KVM Port sockets as the rst Video connection (all in
Port 1, all in Port 2, etc.) Each socket is marked with appropriate icons
2. Repeat steps 4, 5, 6, and 7 for each PC system you are installing
3. On Dual View (dual display) KVM installation, you may also connect all of the
primary Video connectors to Video Sockets B and all secondary Video connectors
to Video Sockets A for easier cable connections. Please make sure your console
primary and secondary monitors are connected the same way.
Note:
1. Only qualied USB Authentication devices (e.g., Smart Card and CAC readers
by default) can be connected into this port. During KVM operation, non-qualied or
non-authorized USB devices will be ltered and rejected (CAC LED that has the
port focus will ash continuously). Please refer to LED Display for visual indica-
tions.
2. CDF (Congurable Device Filtering) function can only be operated by authorized
administrators.
3. Please refer to Administrator’s Guide and Port Authentication Utility Guide for
more details
Note:
IOGEAR Secure KVM Switch performs a security self-test at power-on and at each
power cycle. Front panel LEDs will indicate the self-test status and test result. Please
refer to the Operation section and the LED Display section for visual identication
detail.
7. Connect the female end of the power cord into IOGEAR Secure KVM Switch’s power socket. Then,
connect the male end of the power cord into an AC power source.
8. Power on the IOGEAR Secure KVM Switch and check if the LEDs light up. IOGEAR Secure KVM
Switch will begin KVM self-test momentarily.
Bekijk gratis de handleiding van IOGEAR GCS1218TAA3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1218TAA3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3133 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart, zilver |
| Ingebouwd display | Nee |
| Gewicht | 2950 g |
| Breedte | 430 mm |
| Diepte | 203 mm |
