Intex Krystal Clear 126688 handleiding
Handleiding
Je bekijkt pagina 21 van 26
(379IO) MODEL LS5220/5230 SALTWATER SYSTEM ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 09/30/2024
SAVE THESE INSTRUCTIONS
Page 20
379
A
English
TROUBLESHOOTING GUIDE (continued)
PROBLEM CAUSE SOLUTION
INSUFFICIENT
SODIUM
HYPOCHLORITE
•
Insufficient operating hours of the
Saltwater System.
•
The salt level in the pool water
is less than 800 ppm. This is
insufficient.
•
Sodium hypochlorite loss due to
intense sunlight exposure.
•
The bather load has increased.
•
Clogged or dirty chlorine electrode.
•
High UV level exposure.
•
Cover the pool with an Intex pool cover for 2 days
with the system running and then test the water
using the test strips.
•
Increase the daily Saltwater System operating time.
See “Operating Instructions”.
•
Check the salt level, see “
Salt / Temperature
Detection Display Mode
” section. Adjust as
needed. See “Salt & Pool Water Volumes”.
•
Use a pool cover when the pool is not in use and/or
when the unit is operating.
•
Remove the chlorine electrode for inspection, clean
it if necessary. See “Maintenance”.
•
If the pool is clean and clear, add stabilizer to the
water and then test the water with the system
running.
WHITE FLAKES
IN THE WATER
•
Excessive calcium hardness is
present in pool water.
•
Drain about 20 to 25% of the pool water and add
fresh water to decrease the calcium hardness.
Inspect the chlorine electrode for scale buildup.
Clean the chlorine electrode if necessary.
NO LED DISPLAY
•
No power supply.
•
RCD has not reseted.
•
A power fuse has blown.
•
Display failure.
•
Turn on the system.
•
Reset the RCD.
•
Contact Intex Service Center.
DISPLAY SHOWS
OPERATING
TIME BUT THE
TEMPERATURE
INDICATOR
LIGHT IS RED
•
Temperature sensor failure, faulty.
•
Check the integrity of the
temperature sensor
by
pressing the mode button once, 2 or 3 times, if the
display shows “
- - - -
” or “
E99
”, replace the 2-in-1
sensor.
IMPORTANT
If you continue to experience difficulty, please contact our Consumer Service Department for
assistance. See separate “Authorized Service Centers” sheet.
Bekijk gratis de handleiding van Intex Krystal Clear 126688, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intex |
| Model | Krystal Clear 126688 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5319 MB |
