Intex Krystal Clear 126688 handleiding
Handleiding
Je bekijkt pagina 19 van 26
(379IO) MODEL LS5220/5230 SALTWATER SYSTEM ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 09/30/2024
SAVE THESE INSTRUCTIONS
Page 18
379
A
English
Consult with local swimming pool dealer for water treatment.
• Do not add pool chemicals directly to the skimmer.
• Maintaining a salt and chlorine level above the recommended range can contribute to the corrosion of the
pool equipment.
• Check the expiry date of the test kit as the test results may be inaccurate if the kit is used after that date.
• If, due to heavy pool usage, it is required to increase the sanitizer level, then use a chemical based on
trichlor, TCCA or dichloro.
POOL MAINTENANCE & CHEMICAL DEFINITIONS
Preferred Water Chemistry Reading
Minimum Ideal Maximum
Free Chlorine
0 0.5 - 3.0 ppm 5.0 ppm
Combined Chlorine
0 0 ppm 0.2 ppm
pH
7.2 7.4 - 7.6 7.8
Total Alkalinity
40 ppm 80 ppm 120 ppm
Calcium Hardness
50 ppm 100 - 250 ppm 350 ppm
Stabilizer (Cyanuric Acid)
10 ppm 20 - 40 ppm 50 ppm
Free Chlorine
-
Is the chlorine residual present in pool water.
Combined Chlorine
-
Is formed by the reaction of free chlorine with ammonia wastes.
Result if too high - Sharp chlorinous odor, eye irritation.
pH
-
A value that indicates how acidic or basic a solution is.
Result if too low - Corroded metals, eye & skin irritation, destruction of
total alkalinity.
Result if too high - Scale formation, cloudy water, shorter filter runs, eye &
skin irritation, poor chlorine efficiency.
Total Alkalinity
-
Indicates the degree of the water’s resistance to change in pH. It determines the
speed and ease of pH change, so always adjust total alkalinity before adjusting the
pH level.
Result if too low - Corroded metals, eye & skin irritation. Low alkalinity will
cause the pH to be unstable. Any chemical added to
the water will have an affect on pH.
Result if too high - Scale formation, cloudy water, eye & skin irritation, poor
chlorine efficiency.
Calcium Hardness
-
Refers to the amount of calcium and magnesium dissolved in the water.
Result if too high - Eye & skin irritation, difficulty balancing water and poor
chlorine efficiency. Scale will form and will cause the
water to become cloudy.
Stabilizer
(Cyanuric Acid)
-
Stabilizers extend the life of chlorine in swimming pools.
Bekijk gratis de handleiding van Intex Krystal Clear 126688, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intex |
| Model | Krystal Clear 126688 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5319 MB |
