Intex Krystal Clear 126688 handleiding
Handleiding
Je bekijkt pagina 12 van 26
(379IO) MODEL LS5220/5230 SALTWATER SYSTEM ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 09/30/2024
SAVE THESE INSTRUCTIONS
Page 11
379
A
English
IMPORTANT
The filter pump running time should be 1 hour longer than the required operating time of the Saltwater
System.
OPERATING TIME TABLE (WITH INTEX POOL COVER)
CHLORINE STABILIZER TABLE (WITH INTEX POOL COVER)
Chlorine stabilizer (Cyanuric acid) reduces the loss of chlorine in the water due to ultraviolet rays. Keep
the chlorine stabilizer level at approximately 1% of the salt, i.e. 100 Lbs (45 kg) salt x 1% = 1 Lbs (0.45 kg)
chlorine stabilizer.
If the pool water is dirty, filthy or grimy,
DO NOT add chlorine stabilizer
as this will slowdown the sanitation
time of the system. Instead, use the Saltwater System BOOST function, refer to BOOST cycle section.
Once the pool water has been restored to clear and clean conditions you may add chlorine stabilizer.
Water Capacity
Chlorine Stabilizer Needed for Startup
0.03g/L (30 ppm)
(Gals) (Liters) (Lbs) (kg)
2000 7500 0.5 0.23
3000 11500 0.8 0.35
4000 15000 1.0 0.45
5000 19000 1.3 0.57
6000 22500 1.5 0.68
7000 26500 1.8 0.8
8000 30000 2.0 0.9
9000 34000 2.2 1
Water Capacity Operating Time (hours) at different ambient / air temperatures
(Gals) (Liters)
10 - 19°C
(50 - 66°F)
20 - 28°C
(68 - 82°F)
29 - 36°C
(84 - 97°F)
2000 7500 1 2 3
3000 11500 2 3 3
4000 15000 3 4 5
5000 19000 3 4 5
6000 22500 4 5 6
7000 26500 5 6 7
8000 30000 5 6 7
9000 34000 6 7 8
Bekijk gratis de handleiding van Intex Krystal Clear 126688, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intex |
| Model | Krystal Clear 126688 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5319 MB |
