Intermatic PE953 handleiding
Handleiding
Je bekijkt pagina 24 van 51
24 Multi-Wave PE953 Installation Guide
Copyright © 2011 Intermatic, Inc.
Controlling PE650 Functions
Depending on how the site has been installed with the PE650 Receiving
Device,theremaybeuptovecircuitsbeingcontrolled.Thevefunction
buttonsonthePE653Hand-HeldControllerwillcontrolthevecircuitsin
the PE650 Receiving Device.
1. Ifnecessary,pressandreleaseanybuttonontheHand-HeldControllerto
wake it from sleep.
2. IfthePE650screen(shownattheright)isnot
displayed, press the <ENTER> button until you
see the PE650 screen, as shown.
3. Press the function button for the circuit you want to turn ON or OFF.
• Buttons <1>, <2>, and <3> control circuits 1, 2, and 3 on the Three-
Circuit Clock Mechanism (P1353ME) that is installed on the left side of
the Receiving Device.
• Buttons <4> and <5> control Relay 1 and Relay 2 on the Valve/Pump
Switch Control (P4243ME) that is installed on the right side of the
Receiving Device.
TheHand-HeldController’sdisplayshowsthecircuitnumberalongthetop
of the screen.
Changing Batteries in the Hand-Held Controller
The Hand-Held Controller requires three (3) AA batteries. Battery life is
approximately one year in typical use. When the batteries are weak, the
screen displays a LOW BATT message shown.
To change the batteries:
1. Use a small Phillips
screwdriver to remove
the three screws on
the back of the unit, as
indicated.
2. Place three new batteries in the unit, making sure
to observe “+” and “–” polarity.
3. Be sure to re-install the gasket correctly to
maintain the water-tight seal.
Manually Turning Equipment On and Off
At the Receiving Device
Forservicepurposes,thevecircuitsand/orthe
pool/spa actuators can be operated manually at the
PE653 Receiving Device.
Simply press any of the circuit buttons on the PE653 Receiving Device to
toggle between ON and OFF.
Any manual OFF/ON circuit activation performed at the PE653 Receiving
DevicewillbereectedonthescreenoftheHand-HeldController.
1. Ifnecessary,pressandreleaseanybuttonontheHand-HeldControllerto
wake it from sleep.
2. IftheSCENEACTIVATIONscreen(shownattheright)isnotdisplayed,
press the <ENTER>buttonuntilyouseetheZ-WaveSCENEACTIVATION
screen, as shown.
3. Press button for the scene you want to activate. The
screen displays the scene name.
4. Depending on what you want to do:
• Press the UP button to turn the scene ON.
• Press the DOWN button to turn the scene OFF.
ThescreenwilladdthewordWORKING
followed by SUCCESSFUL when it completes
your command, and will then return to the SCENE
ACTIVATIONscreen.
5. Press the <ENTER> button if you wish to return to the PE653 screen.
Bekijk gratis de handleiding van Intermatic PE953, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PE953 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8177 MB |
