Intermatic PE953 handleiding
Handleiding
Je bekijkt pagina 23 van 51
Two: Everyday use of the PE953 Hand-Held Controller 23
Providing a brighter solution.™
7. When you have selected the right letter or number, press the <P/S> button
to move right to the next character.
8. Press the <ENTER> button to save the name and return to Step 5 above.
Repeat the procedure to name the other speeds.
9. Press the <ENTER>buttonwhenyouarenishedtoreturntotheVARSPD
INTscreen.
Programming New Speeds
1.Ifnecessary,pressandreleaseanybuttononthe
Hand-Held Controller to wake it from sleep.
2. Press the <ENTER> button as necessary to display
theVARSPDINTscreenasshownattheright.
3. Press and hold the <P/S> and <ENTER> buttons at
the same time to put the device into programming
mode.Youareinprogrammngmodewhenthe
LEARN MODE screen is displayed, as shown at the
right.
4. Press the DOWN arrow button as necessary to
display the VSP SPEEDS screen, as shown.
5. Press the button for the speed you want to change.
The screen shows that speed name, and its
corresponding speed in RPM.
6. Use the UP or DOWN arrow buttons to change
the RPM.
7. When you have selected the right RPM, press the
<ENTER> button to save the speed and return to
step 5 above to change your next speed.
8. Repeat the procedure to change the other speeds.
9. Press the <ENTER> buttonwhenyouarenishedto
returntotheVARSPDINTscreen.
Changing Pump Speeds
1. Press and release any button on the Hand-Held Controller to wake it from
sleep.
2. Press the <ENTER>buttonuntilyouseetheVARSPDINTscreen,asshown.
3. Press the button corresponding to the speed you
want to run the pump at.
Controlling Z-Wave Devices
Once you have included Z-Wave devices in the
network and have added them to various Scenes, you
can control them using the Hand-Held Controller.
Note: If controlling Z-Wave devices is your primary use for the controller,
you might want to apply labels that dene the scenes controlled by the ve
buttons.
Bekijk gratis de handleiding van Intermatic PE953, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PE953 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8177 MB |
