Intermatic PE953 handleiding
Handleiding
Je bekijkt pagina 11 van 51
One: Programming the PE953 Hand-Held Controller 11
Providing a brighter solution.™
AnyexistingnetworkorcongurationprogramminginthePE653Receiving
Device is now deleted. The entire system is now at factory reset state and the
components are ready to be linked together within a new electronic network.
Linking the Hand-Held Controller to the PE653
Receiving Device
This procedure creates a network connection between the Hand-Held
Controller and the PE653 Receiving Device by including the PE653 into
the PE953 controller., making it possible to complete the rest of the setup
procedure and operate the system.
NOTE: If the word FAILURE appears at the bottom of the screen during any
of the following steps instead of SUCCESSFUL, repeat the programming
procedure, or try replacing the batteries in the Hand-Held Controller. If the
problem persists, contact Intermatic Customer Service.
1. Ifnecessary,pressandreleaseanybuttonon
the Hand-Held Controller to wake it from sleep.
When all programming is deleted, the Hand-Held
automatically displays the LEARN MODE screen,
as shown. If the screen is not displaying LEARN
MODE, press and hold the <P/S> and <ENTER>
buttons at the same time to put the device into programming mode. You
are in programming mode when the LEARN MODE screen is displayed, as
shown at the right.
2. Press and release the <3> function button to select
INCLUDE DEVICE. The screen refreshes with
instructionstoPRESSBUTTONONDEVICETO
INCLUDE,asshown.
3. Using a pen or pencil, press
the INCLUDEbutton—to
therightoftheredlight—as
shown.
Iftheactionissuccessful,
the screen displays the word SUCCESSFUL, as shown, then returns to the
programming screen (LEARN MODE).
NOTE: If the PE653 has not successfully been included and you are seeing
only the word FAILURE at the bottom of the screen, repeat the two
procedures Deleting Any Existing Programming and Linking the Hand-Held
Controller to the PE653 Receiving Device. If the problem persists, contact
Intermatic Customer Service.
Bekijk gratis de handleiding van Intermatic PE953, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PE953 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8177 MB |
