Intergas Xtend Split handleiding

88 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 74 van 88
74
12.3 Other malfunctions
12.3.1 Malfunction within the indoor unit
Possible causes Solution
The power LED is not displayed. Check the supply voltage, 230V AC 50Hz, see §5.3
Thermostat not connected or faulty. Check the wiring.
Check the connection between the indoor unit and the thermostat, see §8.8.5
Replace the thermostat.
No power (24V). Check the fuse.
Replace faulty parts.
Check the wiring according to the diagram; see §8.7.3.
12.3.2 CH does not get up to temperature
Possible causes Solution
Water pressure in system is too low. Check system for leaks; top the system up if necessary.
Thermostat is not working. Check the settings and adjust if necessary.
Temperature is set too low. Increase the room thermostat target temperature.
Flow temperature from boiler is too low, increase the boiler target temperature.
Check the external temperature sensor for for a short-circuit, check the
parameter settings where necessary, P102, P113, P114, see §11.4.
No heat transfer due to dirt or debris in
the installation.
Flush the system to BS 7593:2019, clean the filter add inhibitor, see §9.2.1.
12.3.3 CH installation stays too hot
Possible causes Solution
Faulty thermostat. Check thermostat for issues; short circuit, batteries where applicable etc, replace
thermostat if necessary.
Faulty temperature sensor(s). Check all temperature sensors; replace faulty sensor
Notification Description Possible cause/solution
n052
Error with OpenTherm
connection to boiler.
Check wiring. Replace if necessary.
N053
Flow temperature from
boiler is too low
Set the flow target temperature of the boiler to the same as the maximum flow
target temperature of the Xtend or higher (P194).
N054
Boiler not responding to
heating request from Xtend.
Check whether the boiler or CH function is turned o.
N055
Boiler has a notification Resolve the boiler malfunction.
N060
Thermostat firmware
version is not up to date if
using the Intergas Comfort
Touch.
Install the latest version of Intergas Comfort Touch.

Bekijk gratis de handleiding van Intergas Xtend Split, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkIntergas
ModelXtend Split
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11570 MB