Intergas Xclusive 36 handleiding
Handleiding
Je bekijkt pagina 78 van 92
78
► Clean the slats of the heat exchanger from top to bottom with a
brush or Intergas comb (use a vacuum cleaner to remove debris).
► Clean the underside of the heat exchanger.
► Only clean the underside of the front panel.
CAREFUL
► The integrated insulation panel and
burner seal contain ceramic fibres use the
appropriate P.P.E dust mask & gloves.
► Li and rotate the expansion vessel to the le side.
► Disconnect the electrical connector to the fan assembly.
► Loosen both unions and the electrical connector then remove
the gas valve.
► Unscrew the 6mm Allen key shoulder bolts of the front cover
and remove it forward along with the fan (Being careful not to
damage any components). Lay the removed front cover face
down on to its foot supports, this is best achieved on a flat heat-
proof surface.
► The burner and the integrated insulation panel do not require
cleaning only inspecting. Therefore, never use a brush or
compressed air to clean these components (dust hazard).
11.3 Annual service continued (internal maintenance)
COMMENT
► The expansion vessel must be inspected and
tested at each annual service and if required
repressurise to 0.75 bar (cold and with no
system pressure). Ensure the flexible hose is
not kinked, leaking or damaged (Replace if
required).
11.3.1 Annual service continued (cleaning)
Bekijk gratis de handleiding van Intergas Xclusive 36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Xclusive 36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12726 MB |
