Intergas Rapid 25 Plus handleiding
Handleiding
Je bekijkt pagina 22 van 68
Intergas Heating Ltd 22
6.3 Assembly
Depending on the installation you can mount the boiler with either mounting bracket
(included inside the boiler box) or the spacer frame (rear piping kit).
Isolation valves pack included in the boiler box.
6.3.1 Fitting the mounting strip
1. Fix the mounting bracket horizontally to the wall.
2. Make sure the mounting bracket is level and secure before hanging the
boiler.
6.3.2 Fitting the spacer frame
When installing the boiler with a horizontal flue, you will need to use the spacer
frame (rear piping kit)when the flue goes directly out the back of the boiler. This
prevents the flue joint being in the wall.
1. Fix the spacer frame vertically to the wall, using the fixings provided.
2. Make sure the frame is level and secure before hanging the boiler.
Important:
The appliance is wider than the frame.
Bekijk gratis de handleiding van Intergas Rapid 25 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Rapid 25 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10092 MB |
