Inkbird IIC-400-WIFI handleiding
Handleiding
Je bekijkt pagina 18 van 20
English
FUNCTION DESCRIPTION
06
Indicator Light
Zone 1~4 indicator lights: Stays on when watering in progress; Flashing
when watering is paused; Flashing in turn when soaking in progress.
Flashing simultaneously when no schedules are running; All off when
the controller shuts down.
All indicator lights are always on and the buzzer beeps once per second
to indicate that the device time has been reset. WiFi needs to be
re-paired to calibrate the device time.
Delay indicator light: When the rain sensor is switched on, it will light up
when rain is detected.
WiFi indicator light: Flashing when it is in the pairing mode; Stays on
when it is connected and online.
Operational Buttons
Manual Watering
Note: You can start a quick run using the controller panel.
The manual watering time on the device is set to 180 minutes by default.
Before to know: In the setting mode, the indicator lights of zones 1~4: stays
on when it’s selected(default), flashing when it is waiting to confirm, and stays
off when it is unselected.
Setting: Press the to enter the setting mode, then press to select the
zone and go to next zone, or press to unselect and go to next zone. Press
the to exit setting mode and start watering
WiFi button: press and hold it for 2 seconds to enter the paring mode.
SET button
Start/Skip Button: Press and hold for 2 seconds to turn the controller
on/off.
14
Skip/End watering
Press to cancel the zone watering when it is in progress.
Bekijk gratis de handleiding van Inkbird IIC-400-WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | IIC-400-WIFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1046 MB |
