Inkbird IHC-200-WIFI handleiding
Handleiding
Je bekijkt pagina 8 van 28
United States
② Then press “Add Home ”button to create
your home.
4
③ Tap “+” or “add device” button in home
page of the APP to add the device.
④ Press and hold the button for 2
seconds to reset the WIFI when the
controller is under normal working state.
The controller will enter the Smartconfig
configuration state by default. You can short
press the button to switch between the
Smartconfig configuration mode and the AP
mode.
As the WIFI module need time for data
processing, so it will take about 5 seconds
to display the corresponding LED symbol
and state if the Wi-Fi states change.
4.3 Quick Connection
(1) Plug the device in the socket and make
② Then press “Add Home ”button to create
your home.
WIFI
WIFI
③ Tap “+” or “add device” button in home
page of the APP to add the device.
④ Press and hold the button for 2
seconds to reset the WIFI when the
controller is under normal working state.
The controller will enter the Smartconfig
configuration state by default. You can short
press the button to switch between the
Smartconfig configuration mode and the AP
mode.
As the WIFI module need time for data
processing, so it will take about 5 seconds
to display the corresponding LED symbol
and state if the Wi-Fi states change.
4.3 Quick Connection
(1) Plug the device in the socket and make
Bekijk gratis de handleiding van Inkbird IHC-200-WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | IHC-200-WIFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1720 MB |
