Inkbird IHC-200-WIFI handleiding
Handleiding
Je bekijkt pagina 16 van 28
humidification state. When PV ≥ 50.0%RH,
the humidification stops, then return to
normal humidity control mode.
6.2 High/Low Humidity Alarm(AH,AL)
The equipment will alarm if the value of
measured humidity(PV) ≥ the set value of
high humidity alarm(AH), the PV screen will
display the set value of high humidity
alarm(AH) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii”until the value of measured
humidity(PV) < the set value of high
humidity alarm(AH). You can also stop the
alarming by pressing any button of the
equipment.
The equipment will alarm if the value of
measured humidity(PV) ≤ the set value of
Low humidity alarm(AL), the PV screen will
display the set value of low humidity
alarm(AL) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii” until the value of measured
humidity(PV) > the set value of low humidity
alarm(AL). You can also stop the alarming
by pressing any button of the equipment.
Note: The setting value of low humidity
alarm(AL) should be less than the setting
value of high humidity alarm(AH).
6.3 Dehumidification Delay Time(PT)
The equipment will not start immediately in
the mode of dehumidification for the first
humidification state. When PV ≥ 50.0%RH,
the humidification stops, then return to
normal humidity control mode.
6.2 High/Low Humidity Alarm(AH,AL)
The equipment will alarm if the value of
measured humidity(PV) ≥ the set value of
high humidity alarm(AH), the PV screen will
display the set value of high humidity
alarm(AH) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii”until the value of measured
humidity(PV) < the set value of high
humidity alarm(AH). You can also stop the
alarming by pressing any button of the
equipment.
The equipment will alarm if the value of
measured humidity(PV) ≤ the set value of
Low humidity alarm(AL), the PV screen will
display the set value of low humidity
alarm(AL) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii” until the value of measured
humidity(PV) > the set value of low humidity
alarm(AL). You can also stop the alarming
by pressing any button of the equipment.
Note: The setting value of low humidity
alarm(AL) should be less than the setting
value of high humidity alarm(AH).
6.3 Dehumidification Delay Time(PT)
The equipment will not start immediately in
the mode of dehumidification for the first
12
humidification state. When PV ≥ 50.0%RH,
the humidification stops, then return to
normal humidity control mode.
6.2 High/Low Humidity Alarm(AH,AL)
The equipment will alarm if the value of
measured humidity(PV) ≥ the set value of
high humidity alarm(AH), the PV screen will
display the set value of high humidity
alarm(AH) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii”until the value of measured
humidity(PV) < the set value of high
humidity alarm(AH). You can also stop the
alarming by pressing any button of the
equipment.
The equipment will alarm if the value of
measured humidity(PV) ≤ the set value of
Low humidity alarm(AL), the PV screen will
display the set value of low humidity
alarm(AL) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii” until the value of measured
humidity(PV) > the set value of low humidity
alarm(AL). You can also stop the alarming
by pressing any button of the equipment.
Note: The setting value of low humidity
alarm(AL) should be less than the setting
value of high humidity alarm(AH).
6.3 Dehumidification Delay Time(PT)
The equipment will not start immediately in
the mode of dehumidification for the first
humidification state. When PV ≥ 50.0%RH,
the humidification stops, then return to
normal humidity control mode.
6.2 High/Low Humidity Alarm(AH,AL)
The equipment will alarm if the value of
measured humidity(PV) ≥ the set value of
high humidity alarm(AH), the PV screen will
display the set value of high humidity
alarm(AH) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii”until the value of measured
humidity(PV) < the set value of high
humidity alarm(AH). You can also stop the
alarming by pressing any button of the
equipment.
The equipment will alarm if the value of
measured humidity(PV) ≤ the set value of
Low humidity alarm(AL), the PV screen will
display the set value of low humidity
alarm(AL) and the current humidity value
alternately, the buzzer will alarm like
“bi-bi-Biii” until the value of measured
humidity(PV) > the set value of low humidity
alarm(AL). You can also stop the alarming
by pressing any button of the equipment.
Note: The setting value of low humidity
alarm(AL) should be less than the setting
value of high humidity alarm(AH).
6.3 Dehumidification Delay Time(PT)
The equipment will not start immediately in
the mode of dehumidification for the first
Bekijk gratis de handleiding van Inkbird IHC-200-WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | IHC-200-WIFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1720 MB |
