InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 8 van 26
12 13
• When the TL35V2 is in use, you may insert (or replace) an
auxiliary battery without powering o. Power will automatically
switch to the built-in battery during replacement of the auxiliary
battery.
Using with an External Power Source
When the data cable is used to connect the BOLT TL35V2, via
the USB-C port, to a computer or external power source (such as a
standard electrical outlet or an external power supply), the rifle scope
will switch to the external power source and begin charging the
built-in battery pack. See External Power Supply on the next page for
more information.
When charging the built-in battery via the USB-C port, the
charging
icon appears in the status bar in place of the normal
battery status icon. See Battery Status Icons on the previous page.
NOTE: Only the built-in battery pack will be charged while
connected via the USB-C port.
13. BATTERY SAFETY WARNINGS
WARNING: Only use the USB charging/data cable provided in the kit
to charge the built-in battery pack.
WARNINGS:
• Do not use a power adapter or USB cable that has been
modified or damaged.
• Do not expose the battery pack to high temperatures or flames
and do not immerse in water.
• Do not leave the TL35V2 unattended while charging the battery
pack.
• Do not leave the battery pack charging for long periods after full
charge is reached. Charging time should not exceed 24 hours.
• Keep the battery pack and rifle scope out of the reach of children
and pets.
• The built-in battery pack is equipped with short-circuit protection.
However, any situation that may cause short-circuiting should be
avoided.
• Do not connect the battery pack to any external device with an
electrical current that exceeds permitted levels.
• Do not disassemble, modify, hit, or drop the battery pack.
• Do not connect an external device with a current supply that
exceeds 3.0 USB port.
11. BATTERY STATUS ICONS
The battery status icon for the built-in battery pack appears on the
right side of the status bar at the top of the screen. If an optional
auxiliary battery is installed, a status icon for the auxiliary battery
appears to the left of the icon for the built-in battery.
Ultra-Clear
The battery status icon for the active battery (the battery currently
being used to power the TL35V2) is displayed in color, while the
inactive battery is displayed in gray.
Battery charge levels are indicated by the color and fill-level of the
icon for the active battery and the fill-level of the gray icon for the
inactive battery.
When charging the built-in battery via the USB-C port, the
charging
icon appears in the status bar in place of the normal
battery status icon. Charge the built-in battery pack when it reaches
the red battery status color to avoid over-discharge and potential
damage to the battery.
ICON COLOR / STATUS BATTERY STATUS
Green More than 40%
Yellow 20% – 40%
Red < 20%; charge the battery promptly
Charging Icon
The battery is charging (external power
supply or computer is connected via
the data cable)
Inactive Battery Status of the inactive battery
12. SWITCHING THE BATTERY
POWER SUPPLY
The BOLT TL35V2 has a dual power supply system with a built-in
li-ion battery pack and an auxiliary battery option. 18500, or 18650
with adapter, rechargeable li-ion batteries (optional/not included) are
compatible with the TL35V2.
Using with the Optional Auxiliary Battery
• When both the built-in battery pack and the auxiliary battery are
fully charged, the TL35V2 will select the auxiliary battery as its
primary power source.
• If the power of the auxiliary battery is low, or the auxiliary battery
is removed, the TL35V2 will automatically switch to the built-in
battery pack as its primary power supply. Operation will not be
interrupted during this time.
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
