InfiRay BOLT TH50C V2 handleiding
Handleiding
Je bekijkt pagina 27 van 28
50 51
The aiming reticle shifts after
firing rounds.
The TH50CV2 is not mounted
securely or the mount is not secured
on the TH50CV2.
• Check that the TH50CV2 has been securely mounted.
• Make sure you are using the same brand, type, and weight of the bullets as
when the TH50CV2 and weapon were initially zeroed.
• If the TH50CV2 was zeroed in dierent environmental conditions, a slight
shift of the zero is possible.
The image of the object being
observed is missing.
Looking through glass. Remove any glass windows from the field of view.
The TH50CV2 will not focus.
Image settings are not optimal for the
current environmental conditions or
the object being observed.
• Check the outer surfaces of the objective lenses and eyepiece and, where
necessary, wipe away any dust, condensation, frost, etc.
• In cold weather, you can use special anti-fogging coatings, such as those
made for corrective glasses.
• Adjust the focus on the target by rotating the Objective Lens Focus Ring (14).
• Adjust the image sharpness in the quick menu. See Using the Quick Menu
on page20.
• Adjust the image and device settings. See Quick Start Guide on page8.
• Turn on Ultra-clear mode. See Main Menu > Ultra-clear on page31.
Image quality is too low or the
detection range is reduced.
These issues may occur due to the
weather conditions, such as snow,
rain, humidity, and fog.
Turn on Ultra-clear mode. See Main Menu > Ultra-clear on page31.
When the TH50CV2 is used in
low-temperature conditions, the
image quality of the surroundings
is worse than in warm-temperature
conditions.
Environmental conditions.
In warm-temperature conditions, objects being observed (surroundings and
background) heat up dierently because of thermal conductivity, thereby
generating a high temperature contrast. Accordingly, the image quality
produced by the rifle scope will be higher. In low-temperature conditions, the
background will cool down to roughly the same temperature, and thus the
temperature contrast is substantially reduced and image detail can go down as
there is less contrast in the scene. This is a normal function of a thermal imager
and is no indicator of actual detector performance.
ISSUE POSSIBLE CAUSES TROUBLESHOOTING STEPS
31. NOTES
Bekijk gratis de handleiding van InfiRay BOLT TH50C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TH50C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7222 MB |
