Infiniton CAS2OV50D handleiding
Handleiding
Je bekijkt pagina 16 van 37
inniton.es16
Installation
English
Extension bolt with hook for han-
ging the heater
INSTALLATION INSTRUCTIONS
1. This electric water heater must be installed on a strong wall. If the wall cannot support a load equi-
valent to twice the total weight of the water-lled heater, it will be necessary to install a special su-
pport. In case the wall is made of a hollow material, be sure to ll it completely with a layer of cement
concrete.
2. After selecting a suitable location, determine the position of the two installation holes used for the
extension bolts with hook and drill two holes in the wall with the corresponding depth by using a drill
bit with the size matching the expansion bolts connected with the heater, insert the bolts, place the
hook upwards, tighten the nuts to x rmly, and then hang the electric water heater (see Fig.2).
3. Install the wall outlet. The socket must be 220V. It is recommended to place the socket on the right
side, above the heater. The height of the socket to the oor should not be less than 1.8m (see Fig.3). In
case of failure of the power cord, it must be replaced by the manufacturer, a service technician or a
qualied person to ensure safety.
4. If the bathroom is too small, the heater can be installed elsewhere. However, in order to reduce heat
losses from the piping, the place of installation of the heater should be as close to the heater as pos-
sible.
Bekijk gratis de handleiding van Infiniton CAS2OV50D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | CAS2OV50D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3905 MB |
