Indesit Push&Go IN2FE13DT9WUK handleiding

Vaatwasser

Indesit

50 pagina's

PDF beschikbaar

Handleiding

EN / 14

5 Installation

Read the ‘Safety Instructions’ sec-

tion first!

The preparation of the electrical, clean wa-

ter and waste water installation of the

place where the product will be placed is

under the responsibility of the customer.

Before calling the authorised service to

make the product ready for use, if the elec-

trical installation, clean water installation

and water drainage are not suitable, call a

qualified electrician and plumber to make

the necessary arrangements.

Installation and electrical connec-

tions must be carried out by the au-

thorised service. The manufacturer

cannot be held responsible for any

damages that may arise from the

operations performed by unauthor-

ised persons.

Before installing the product, in-

spect the product for any damage.

Do not install the product if it is

damaged. Damaged products pose

a danger to your safety.

For free-standing and under-

counter models, do not remove the

kick plate of the appliance. This will

void the warranty.

• When placing the product in place after

installation or cleaning, make sure that

the water inlet and drain hoses are not

folded, pinched or broken.

• Be careful not to damage the floor, wall,

pipes, etc. when placing the product. Do

not hold the door or panel to move the

product.

5.1 Correct location for installation

• There must not be any lockable, sliding or

hinged doors in the place where the

product is installed, which would restrict

the full opening of the door.

• Place the product on a solid and level

surface with sufficient load-bearing capa-

city! Placing the dishwasher on a level

surface is essential for the door to close

properly and tightly.

• Do not install the product in places where

the temperature drops below 0 ºC.

• Place the product on a hard floor. Do not

place it on a long-pile carpet or similar

surface.

• Choose a place where you can load and

unload the dishes easily and quickly.

• Place the product close to the tap and

drain. Choose the location of the product

in such a way that you do not change it

after it has been connected.

Do not place the product on the

power cable. The cable may be

damaged, causing a risk of electric

shock or fire.

5.2 Connecting to the water supply

To prevent dirt (sand, clay, rust, etc.) from

the city network or your water supply sys-

tem from damaging the dishwasher and

your dishes, we recommend installing a fil-

ter on the water inlet.

Maximum allowable water inlet temperat-

ure:

• With AquaSafe+ feature containing mod-

els, it is 60 °C.

• Up to 25 °C for other models.

Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9WUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.