Indesit Push&Go IN2FE13DT9SUK handleiding
Handleiding
Je bekijkt pagina 18 van 50

EN / 18
Hardness Level
English Hardness
°dE
German Hardness
°dH
French Hardness
°dF
Water Hardness Level Indicator
0. Level
0-5 0-4 0-8
The Washing light on the panel il-
luminates.
1. Level
6-9 5-7 9-13
The Washing light on the panel il-
luminates.
2. Level
10-15 8-12 14-22
The Drying light on the panel illu-
minates.
3. Level
16-19 13-15 23-27
The End light on the panel illumin-
ates.
4. Level
20-24 16-19 28-34
The Washing, Drying and End
lights on the panel illuminate.
5. Level
25-62 20-50 35-90
The Washing, Drying and End
lights on the panel flashes with in-
tervals of 1 second.
Table1: Water Hardness Level Setting
Table
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, you should use filters and
water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
NOTICE!If you move house, you may
need to adjust the water hardness set-
ting of your dishwasher again according
to the water hardness of the place you
move to, taking into account the inform-
ation given above. If the water hardness
setting of your dishwasher has been ad-
justed before, the last water hardness
setting will be displayed on your dish-
washer’s display panel.
6.4 Filling the salt
The water softening system must be re-
newed in order for the dishwasher to oper-
ate at the same performance at all times.
Dishwasher salt is used for this purpose.
Only use special softening salt for
use in dishwashers.
It is recommended to use granu-
lated or powdered softening salts
in the water softening system. Do
not use salts such as table salt and
rock salt that do not dissolve com-
pletely in water. Otherwise, the per-
formance of the system may deteri-
orate over time.
The salt compartment fills with wa-
ter when you switch on the dish-
washer. Therefore, fill the salt com-
partment before starting the dish-
washer.
1. Initially remove the lower basket to
load softening salt.
2. Open the salt compartment lid by turn-
ing it anti-clockwise (A).
Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9SUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Indesit |
Model | Push&Go IN2FE13DT9SUK |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 6024 MB |