Indesit MyTime IMA 762 handleiding
Handleiding
Je bekijkt pagina 38 van 40
38
Code Fault Description Possible Causes
E02 Abnormal water inow
1. Check that the water tap is open;
2. Check that the inlet hose is not bent;
3. Clean the lter of the inlet water connection at the
back of the appliance. It could be blocked with limes-
cale or any other debris;
4. Water pressure is too low or the water tap is not fully
open;
5. The appliance is not properly installed, causing a sy-
phon eect. Connect the drain hose as indicated in the
instructions for use;
6. The drain hose does not respect the height required
(please check the value in the instructions for use.
E03 Abnormal drainage Clean the drain pump lter
E05 Water temperature NTC failure
Power o
E11
Condenser NTC or dryer NTC
failure
EE0 Water heating pipe open circuit
EE1
Heating pipe short circuit (water
heating or dryer heating)
U4 Door lock failure
EA2 Water level abnormally high
EA1 Water level switch failure
Eb02 Supply voltage too low
Disconnect the appliance, wait 10 minutes and plug it
back in.
Eb04 Supply voltage too high
Eb08 Abnormal motor operation
Reduce the laundry load following the instructions for
use.
Eb20
IPM anomaly or IPM and motor
overtemperature
Reduce the laundry load following the instructions for
use.
Eb90 Reset timeout
EC1
Abnormal communication be-
tween display and inverter
Disconnect the appliance, wait 2 minutes and plug it
back in.
EC2
Abnormal communication be-
tween display and main control
H High temperature Decrease temperature
Bekijk gratis de handleiding van Indesit MyTime IMA 762, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indesit |
| Model | MyTime IMA 762 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4387 MB |
