Indesit MyTime IMA 762 handleiding
Handleiding
Je bekijkt pagina 34 van 40
34
The loading door can-
not be opened�
• The loading door lock is activated because of the water level in the
product. >>> Drain the water by running the Drain or Spin program.
• The product is heating up the water or it is on the spin cycle. >>>
Wait until the program nishes.
• The loading door may be stuck because of the pressure it is subject-
ed to. >>> Grab the handle and push and pull the loading door to
release and open it.
Washing takes longer
than specied in the
user manual� (*)
• Water pressure is low. >>> The product waits until an adequate
amount of water has been taken in, so as to prevent poor wash qual-
ity due to insucient water. The washing time is therefore extended.
• Voltage is low. >>> The washing time is prolonged to avoid poor
wash results when the supply voltage is low.
• The input water temperature is low. >>> The time required to heat
up the water is longer in cold seasons. Also, the washing time can be
lengthened to avoid poor washing results.
• The number of rinses and/or amount of rinse water have increased.
>>> The product increases the amount of rinse water when good
rinsing is needed and adds an extra rinse step if necessary.
• Excessive foam has occurred and the automatic foam absorption
system has been activated due to excessive detergent usage. >>>
Use the recommended amount of detergent.
The program dura-
tion countdown is not
shown� (On models with
display) (*)
• The timer may stop during water intake. >>> The timer indicator will
not start until the product takes in an adequate amount of water.
The product will wait until there is enough water to avoid poor
washing results due to lack of water. The timer indicator will resume
after this.
• The timer may stop during the heating phase. >>> The timer indica-
tor will not start until the product reaches the selected temperature.
• The timer may stop during the spin cycle. >>> The automatic unbal-
anced load detection system is activated due to the uneven distribu-
tion of the laundry in the drum.
The program dura-
tion countdown is not
shown� (*)
• The load inside is the product is unbalanced. >>> The automatic
unbalanced load detection system is activated due to the uneven
distribution of the laundry in the drum.
The product does not
switch to spin cycle� (*)
• The load inside is the product is unbalanced. >>> The automatic
unbalanced load detection system is activated due to the uneven
distribution of the laundry in the drum.
• The spin cycle will not start if water is not drained completely. >>>
Check the lter and the drain hose.
• Excessive foam has built up and the automatic foam absorption
system has been activated due to too much detergent usage. >>>
Use the recommended amount of detergent.
Wash performance is
poor: Laundry turns
gray� (**)
• Insucient amounts of detergent have been used over a long
period of time. >>> Use the recommended amount of detergent
depending on water hardness and laundry type.
• Washing has been done at low temperatures for a long time. >>>
Select the proper temperature for the laundry to be washed.
• Insucient amounts of detergent have been used with hard water.
>>> Using an insucient amount of detergent with hard water
causes the soiling to stay on the fabric and this turns it gray over
time. It is dicult to eliminate graying once it happens. Use the
recommended amount of detergent depending on water hardness
and laundry type.
• An excessive amount of detergent has been used. >>> Use the
recommended amount of detergent depending on water hardness
and laundry type.
Bekijk gratis de handleiding van Indesit MyTime IMA 762, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indesit |
| Model | MyTime IMA 762 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4387 MB |
