Handleiding
Je bekijkt pagina 13 van 28
13
Using the Additional Functions
Delay Start Function
The Delay function allows you to postpone the start
of the drying program by up to 24 hours.
• Load your laundry and close the door.
• Press the Power button.
• Turn the program selector to choose your desired
drying cycle.
• (Optional) Select any additional functions such as
Anti-crease or Signal if required.
• Press the Delay button repeatedly to select your
preferred delay time.
• Press the Start/Pause button. The dryer will enter
standby mode and begin the countdown. The delay
icon will blink on the display.
• Once the countdown reaches zero, the selected
program will begin automatically.
NOTE:
• To pause the countdown, press Start/Pause again.
• To cancel the Delay function, press the Power button.
Time Adjustment Function
• When using the Time program, you can manually
adjust the drying time in 10-minute increments by
pressing the Time button.
• This function is ideal for items that require specific
drying durations, such as pillows or jackets.
Anti-crease Function
At the end of the drying cycle, the Anti-crease function
gently tumbles the laundry to reduce wrinkling.
• By default, the drum will intermittently rotate for
30 minutes after drying ends.
• You can extend this period to 120 minutes by pressing
the Anti-crease button during cycle setup.
• If you remove the laundry promptly at the end of the
drying cycle, this function may not be needed.
NOTE:
• This function is available with all programs except:
Cool, Wool, and Refresh.
• Laundry can be removed at any time during
the Anti-crease phase.
Intensity Function
The Intensity function allows you to adjust the final
dryness level of the laundry, depending on your
preference.
Ideal for achieving a cupboard-dry finish or reducing
residual moisture for line-drying or ironing.
• Press the Intensity button before starting the program
to increase the drying intensity.
• This function is available on most programs except:
Cotton Iron, Delicate, Wool, and Time.
My Dry (Preset Drying settings)
The My Dry function lets you save your preferred drying
program for easy access in future.
• Select your desired drying program and any additional
settings (e.g. Intensity, Anti-crease).
• Press and hold the Time button for 3 seconds
until a beep sounds to confirm your settings have
been saved.
• Next time, simply turn the selector to My Dry and
press Start/Pause to begin your preset program.
NOTE:
To update your saved cycle, repeat the steps above with
your new selections.
Child Lock Function
The Child Lock helps prevent accidental or unsafe
operation by disabling the control panel during a drying
cycle.
• To activate: Press and hold the Anti-crease button for
3 seconds while a program is running.
• When activated, a Child Lock icon will appear on the
display. All buttons will be disabled except the Power
button.
• To deactivate: Press and hold the Anti-crease button
again for 3 seconds.
NOTE:
This feature is particularly useful if there are young
children in the home.
Operation Instructions (Continued)
Bekijk gratis de handleiding van InAlto IHPD800S2W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IHPD800S2W |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 2298 MB |
