Handleiding
Je bekijkt pagina 12 van 28
12
Operation Instructions (Continued)
Before First Use
• After transporting the dryer, allow it to stand upright
for at least two hours before switching it on. This gives
the refrigerant time to settle.
• Wipe the inside of the drum with a soft cloth to
remove any dust or residues from manufacturing.
• Place a few clean rags into the drum.
• Plug in the power supply and press the Power button.
• Select the Refresh program, then press the
Start/Pause button.
• Once the cycle is complete, refer to the Maintenance
and Cleaning section to clean the door filter.
• Running an initial cycle with clean cloths helps remove
any residual odours or particles from manufacturing.
• NOTE: It is normal for the compressor and water
pump to make some operating noise during the
drying cycle.
Before Drying
• CAUTION: Ensure the dryer has been correctly
installed and connected before first use.
• Spin laundry at a high speed in your washing machine
to reduce moisture content. This shortens drying time
and improves energy eciency.
• Sort laundry by fabric type to ensure even drying and
choose the appropriate drying program.
• Close all zips, hooks, and fasten buttons. Tie fabric
belts and secure loose items.
• Check and empty all pockets — remove items such as
lighters, coins, and matches.
• Remove or sew in underwires from bras before drying.
• Fasten duvet covers and pillowcases to prevent small
garments from getting trapped inside.
• Leave jackets open and unzip long zips to ensure even
drying.
• Avoid over-drying, as this may cause creasing and
damage to fabrics.
• Do not dry items containing rubber or similar heat-
sensitive materials.
• Keep the area around the dryer clean. Do not operate
the dryer near combustible dust such as coal dust or
flour.
• Only open the door once the drying cycle is complete
to avoid hot steam or heat exposure.
• Clean the lint filter and empty the water tank after
each cycle to maintain performance and reduce
energy use.
• Do not place garments in the dryer that have been
dry-cleaned.
Approximate Dry Weight Guidelines
• Refer to the fabric care label and machine
capacity chart in this manual for weight estimates
by garment type.
• NOTE: Do not overload the dryer. Avoid drying
dripping wet laundry as it may damage the appliance
and clothing.
After Washing / Program Completion
• When the drying cycle finishes, the dryer will beep and
the display will show "0:00".
• The cycle phase LED will illuminate to indicate
completion.
• If laundry is not removed promptly, the Anti-crease
function will activate automatically to reduce
wrinkling.
• After removing laundry, press the Power button and
unplug the dryer.
• Let the appliance cool down slightly before cleaning
the filter or emptying the water tank.
Drying Process
• Once a program is started, the drum will begin to
rotate.
• The LED indicator for the active cycle phase will light
up, and the remaining time will appear on the display.
Bekijk gratis de handleiding van InAlto IHPD800S2W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IHPD800S2W |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 2298 MB |
