InAlto IDW6014W handleiding
Handleiding
Je bekijkt pagina 9 van 32
09
Connection of Drain Hoses
Insert the drain hose into a drain pipe with a minimum
diameter of 4 cm, or let it run into the sink, making sure
to avoid bending or crimping it. The height of drain pipe
must be less than 1000mm. The free end of the hose
must not be immersed in water to avoid the back flow
of it.
WARNING:
Ensure that the drain hose is securely fixed in either
position A or position B.
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess water
in hoses cannot be drained directly into the sink. It will
be necessary to drain excess water from hoses into a
bowl
or suitable container that is held outside and lower than
the sink.
Water outlet
Connect the water drain hose. The drain hose must be
correctly fitted to avoid water leaks. Ensure that the
water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a
similar drain hose. It must be no longer than 4 meters;
otherwise the cleaning eect of the dishwasher could
be reduced.
Siphon connection
The waste connection must be at a height less than 100
cm (maximum) from the bottom of the dish. The water
drain hose should be fixed.
Installation Instructions (Continued)
A
B
Counter
Ø40mm
Max. 1000mm
Drain Hose
Water Inlet
Drain Pipe
Mains Cable
Dishwasher Rear
Bekijk gratis de handleiding van InAlto IDW6014W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IDW6014W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3224 MB |
