InAlto IDW6014W handleiding
Handleiding
Je bekijkt pagina 8 van 32
08
Prior to Installing Appliance
WARNING: ELECTRICAL SHOCK HAZARD
Disconnect electrical power before installing dishwasher.
Failure to do so could result in death
or electrical shock.
IMPORTANT: The installation of the pipes and electrical
equipments should be done by professionals.
Power Connection
WARNING: FOR YOUR PERSONAL SAFETY
• Do not use an extension cord or an adapter plug
with this appliance.
• Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
Electrical requirements
Please look at the rating label to know the rating
voltage and connect the dishwasher to the appropriate
power supply. Use the required fuse 10A/13A/16A, time
delay fuse or circuit breaker recommended and provide
separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being
corresponds to those on the rating plate. Only insert the
plug into an electrical socket which is earthed properly.
If the electrical socket to which the appliance must be
connected is not appropriate for the plug, replace the
socket, rather than using a adapters or the like as they
could cause overheating and burns.
WARNING: Ensure that proper earthing exists before
use.
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to a threaded 3/4
inch connector and make sure that it is fastened tightly
in place.
If the water pipes are new or have not been used for
an extended period of time, let the water run to make
sure that the water is clear. This precaution is needed
to avoid the risk of the water inlet to be blocked and
damage the appliance.
WARNING:
A hose that attaches to a sink spray can burst if it is
installed on the same water line as the dishwasher. If
your sink has one, it is recommended that the hose be
disconnected and the hole plugged.
Levelling the appliance
Once the appliance is positioned for levelling, the height
of the dishwasher may be altered via adjustable levelling
feet. Do not be incline the appliance by more than 2°.
INSTALLATION INSTRUCTION
Ensure the voltage and frequency of the power being corresponds to those on the
rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, replace the socket, rather than using a adaptors or the like as
they could cause overheating and burns.
Electrical requirements
Electrical connection
Ensure that proper earthing exists before use
About Power Connection
WARNING
For personal safety:
Do not use an extension cord or an adapter
plug with this appliance.
Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
The installation of the pipes and electrical equipments should be done by professionals.
Attention
WARNING
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failure to do so could result in death or
electrical shock.
13
Please look at the rating label to know the rating voltage and connect the dishwasher
to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse
or circuit breaker recommended and provide separate circuit serving only this appliance.
Installation Instructions
Bekijk gratis de handleiding van InAlto IDW6014W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IDW6014W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3224 MB |
