Handleiding
Je bekijkt pagina 4 van 5
CHILD-LOCK FUNCTION is to lock all the settings at working mode or “Timer” mode. Under
lock status, induction cooker would not respond to any key press.
After selecting the desired function, press and hold the LOCK button for 3 seconds to lock,
and digital display shows ‘LOC’ indicating that all the settings are lock
To unlock, press and hold LOCK button for 3 seconds
HIGH TEMP. Light indicator will light up and digital display will show ‘HOT’ indicating that the
cooking plate is hot. Do not touch the cooking plate during cooking process or after use. It will
be extremely hot and may cause burn or injuries. Let the unit cool down before moving the unit
or before cleaning.
5. After use, Press the “ON/OFF” key to switch back to sleeping mode.
6. Unplug the unit after every use.
PARAMETER TABLE:
FUNCTION
DEFAULT
(POWER / TEMP /
TIME)
ADJUSTABLE
(POWER / TEMP)
TIMER
PRESET
TIMER
HOT POT
1500W
300 - 1500W
0:01-3:00
STIR-FRY
1300W
300 – 1500W
0:01-3:00
BBQ
180°C
60°C - 240°C
0:01-3:00
SOUP
2:00
0:00-3:00
-
0:01-23:59
WATER
0:30
0:00-3:00
-
0:01-23:59
WARM
0:20
0:00-3:00
-
0:01-23:59
CLEANING AND MAINTENANCE:
1. Turn off the power and pull out the plug before cleaning.
2. Wait for the unit to cool down before cleaning.
3. Select proper detergent to remove the dirt.
4. Use neat wet cloth to clean the unit after removing the dirt.
5. Do not clean the unit directly with water.
6. Clean the cooking plate and pan before cooking. Otherwise, dirt after charring is difficult to
clean and the plate may get discoloration.
7. You may clean air vent or air entry’s dirt by vacuum cleaner to suck up or by cotton. If there is
dirt with oil, it is right to use toothbrush with a little detergent to clean the surface. Never clear
inside with water or any kind of liquid.
8. Do not use caustic detergents to clean the unit. It may damage the unit by chemical reaction.
9. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction
cooker.
TROUBLESHOOTING:
PROBLEM
POSSIBLE CAUSE
RECOMMENDATION
No Power
Indicator
Power cord not properly plugged
Kindly make sure that the power cord
is properly plugged
Automatically
switched OFF
Overload Protection
No operation for more than 2hrs
Unplug the unit and wait for about two
minutes before plugging in.
Bring the unit to the nearest Imarflex
Service Center
E0
Pot not suitable
Pot is smaller the 12cm diameter (bottom)
Pot not in the center of cooking plate
Replace the pot with pure stainless-
steel induction ready pot
Replace the pot with a minimum of
12cm diameter of pure stainless-steel
induction ready pot
Adjust the pot at the center of the
cooking plate
E1 / E2
Voltage too high / Voltage too Low
Unplug the unit and wait for about two
minutes before plugging in.
E3
Sensor open / Short circuit
Bring the unit to the nearest Imarflex
Service Center
E4
IGBT open / Short circuit
Bring the unit to the nearest Imarflex
Service Center
E5
Temperature in the cooking plate has
reached more than 280°C
Wait for a few minutes to let the
cooking plate cool down.
Bring the unit to the nearest Imarflex
Service Center
Bekijk gratis de handleiding van Imarflex IDX-1850S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Imarflex |
| Model | IDX-1850S |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1024 MB |