Imarflex IDX-1850S handleiding

Handleiding

12345/ 5

Afdrukken

Je bekijkt pagina 3 van 5

CONTROL PANEL:

OPERATING PRINCIPLE:

Induction Cooker applies the heating principle of the magnetic field inducing the whorl electric

current. It utilizes the magnetic field produced by the current passing the loop when the magnetic force

line passes the bottom of the stainless-steel cookware. It produces numberless whorl electric current that

will heat up the stainless-steel cookware rapidly. This process is extremely efficient and minimizes the use

of electricity.

The Imarflex Induction Cooker automatically detects if the cookware is induction-ready.

SUITABLE COOKWARES:

 Magnetized stainless steel and cast iron

 Acceptable pot diameter is 12cm-24cm

NOTE: FOR OPTIMAL PERFORMANCE AND EFFICIENCY, USE POTS THAT ARE WITHIN

THE SIZE OF THE CIRCULAR PRINT ON THE INDUCTION PLATE.

UNSUITABLE COOKWARES:

 Non-magnetized stainless steel, aluminum, plastic, glass, porcelain, ceramic, stainless steel

pot smaller than 12cm, bottom not flat

CAUTION:

 Do not leave an empty cookware with the Induction Cooker is ON

 When STIR-FRYING with little oil in the pot, don’t overheat the oil, otherwise it will kindle easily

 When FRYING, the volume of the oil in the pot should be not less than 0.9 liter since little oil

might burn easily

HOW TO USE:

1. Plug the unit into the convenience outlet. A beep sound will be heard and digital display will be

flashing and shows’88:88 ‘indicating that the unit is ON.

2. Press ON/OFF button and digital display shows moving ‘- - - -’ indicating that the unit is in

standby mode.

3. Place the cookware into the center of the cooking plate.

4. Then press FUNCTION to select the desire function.

 Press FUNCTION button once for ‘HOTPOT’ function. The default power is 1500W and can

be adjusted from 300W to 1500W by pressing UP and DOWN

 Press FUNCTION button twice for ‘STIR-FRY’ function. The default power is 1300W and can

be adjusted from 300W to 1500W by pressing UP and DOWN

 Press FUNCTION button three times for ‘BBQ’ function. The default temperature is 180°C

and can be adjusted from 60°C to 240°C by pressing UP and DOWN

 Press FUNCTION button four times for ‘WARM’ function. The default time is 0:20 and can be

adjusted from 0:00 to 3:00 by pressing UP and DOWN

 Press FUNCTION button five times for ‘WATER’ function. The default time is 0:30 and can

be adjusted from 0:00 to 3:00 by pressing UP and DOWN.

 Press FUNCTION button six times for ‘SOUP’ function. The default time is 2:00 and can be

adjusted from 0:00 to 3:00 by pressing UP and DOWN.

TIMER SETTING is only applicable for HOTPOT, STIR-FRY, BBQ function.

 Select the desired function first then press ‘TIMER’ button once. The digital display will be

flashing and shows “0:00” indicating the default time is 0 minute. Timer can be adjusted from

0:01 to 03:00. To confirm the set time, wait until the time is steady or stop flashing. The timer

will start the countdown automatically. If the timer is set “0:00”, the digital display will flash and

the setting will cancel after 10 seconds.

PRESET TIMER is only applicable for SOUP, WATER and WARM function.

 Select the desired function first then press ‘TIMER’ button once. The digital display will be

flashing and shows “0:00” indicating the default time is 0 minute. Preset time can be adjusted

from 00:01 to 23:59. To confirm the preset time, wait until the time is steady or stop flashing.

Once the preset time is done, a beep sound will be heard and the selected function will

automatically start. If the preset is set “0:00”, the digital display will flash and the setting will

cancel after 10 seconds.

12345/ 5

Bekijk gratis de handleiding van Imarflex IDX-1850S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Fornuis