IKEA LAGAN 705.680.13 handleiding
Handleiding
Je bekijkt pagina 14 van 44
14ENGLISH
Problems... Possible causes... Solutions...
Dishes have not
been dried.
Selected program has no drying phase.
Verify in the programs table if the selected program has drying
phase.
Rinse aid has run out or the dosage is not
adequate.
Add the rinse aid or adjust the dosage levels higher (see FILLING
THE RINSE AID DISPENSER).
Dishes are made of non-stick or plastic. The presence of drops of water it is normal (see TIPS).
Dishes and
glasses show
limescale or a
whitish lm.
Salt level is too low. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
Adjustment of the water hardness is not
adequate.
Increase the values (see WATER HARDNESS TABLE).
Cap of the salt reservoir is not properly
closed.
Check the salt reservoir cap.
Rinse aid has run out or the dosage is
insucient.
Add the rinse aid or adjust the dosage levels higher.
Dishes and glasses
have a bluish tinge
or blue streakes.
Rinse aid dosage is excessive. Adjust the dosage rates to lower values.
After-Sales Service
If, after carrying out the above checks, the fault persists, discon-
nect the mains plug and turn o the water tap. Contact the
After-sales Service (see guarantee).
Before contacting our After-Sales Service, take note of the
following:
• the description of the fault,
• the appliance type and model,
• the service code (the number indicated on the adhesive
rating plate) inside the door on the right-hand side:
Bekijk gratis de handleiding van IKEA LAGAN 705.680.13, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | LAGAN 705.680.13 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9023 MB |
