Ignition Gawan 200 handleiding
Handleiding
Je bekijkt pagina 34 van 40
10 Fehlerbehebung
NOTICE!
Data transfer errors due to improper wiring!
If the DMX connections are wired incorrectly, this can cause errors
during the data transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers
or ampliers.
Use special DMX cables for the wiring instead of normal microphone
cables.
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom Remedy
The unit does not work, no
light, the fan does not run
Check the mains connection and the main fuse.
No response to the DMX con‐
troller
1. Check the DMX connectors and cables for
proper connection.
2. Check the address settings and the DMX
polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or
alongside to high voltage cables that may cause
damage or interference to DMX interface circuits.
If the procedures recommended above do not succeed, please contact our Service
Center. You can nd the contact information at www.thomann.de.
Fehlerbehebung
34
Gawan 200
Moving Head
Bekijk gratis de handleiding van Ignition Gawan 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | Gawan 200 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3997 MB |
