Ignition 2Bright Expo 575 CW handleiding
Handleiding
Je bekijkt pagina 21 van 36
1. Press [MENU] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘M/S Master’ and conrm with [ENTER].
3. Use [UP] or [DOWN] to select between ‘Master’ (device works as a master) and ‘Slave’
(device works as a slave) and conrm with [ENTER].
4. To return to the previous menu level without changes, press [MENU].
1. Press [MENU] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Dimmer’ and conrm with [ENTER].
3. Use [UP] or [DOWN] to select a value between ‘Dim: 001’ and ‘Dim: 255’ to adjust the
brightness in a range of 0 % to 100 % and conrm with [ENTER].
4. To return to the previous menu level without changes, press [MENU].
1. Press [MENU] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Strobe’ and conrm with [ENTER].
3. Use [UP] or [DOWN] to select a value between ‘Hz: 01’ and ‘Hz: 30’ to adjust the ash
frequency from slow to fast and conrm with [ENTER].
4. To return to the previous menu level without changes, press [MENU].
Master / slave mode
Dimmer
Stroboscope
Operating
2Bright Expo 575 WW, 2Bright Expo 575 CW
21
LED Spotlight
Bekijk gratis de handleiding van Ignition 2Bright Expo 575 CW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | 2Bright Expo 575 CW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2335 MB |
