Ignition 2Bright Expo 575 CW handleiding
Handleiding
Je bekijkt pagina 20 van 36
7 Operating
7.1 Main menu
1. Press [MENU] to activate the main menu.
2. Use [UP] or [DOWN] to select the desired parameter or to change the respectively dis‐
played value.
3. When the display shows the desired parameter or value press [ENTER] to enter the
respective submenu or to conrm a new value.
4. To return to the previous menu level without changes, press [MENU].
1. Press [MENU] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Address’ and conrm with [ENTER].
3. Use [UP] or [DOWN] to select a value between ‘Add: 001’ and ‘Add: 512’ to set the
desired DMX address and conrm with [ENTER].
Make sure that this number matches the conguration of your DMX controller. This set‐
ting is only relevant when the device is controlled via DMX.
4. To return to the previous menu level without changes, press [MENU].
DMX address
Operating
20
2Bright Expo 575 WW, 2Bright Expo 575 CW
LED Spotlight
Bekijk gratis de handleiding van Ignition 2Bright Expo 575 CW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | 2Bright Expo 575 CW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2335 MB |
