IFM RM901S handleiding
Handleiding
Je bekijkt pagina 18 van 26
RM900S RM901S RM902S RM903S Encoder (SR) with CANopen interface
18
6.6 Potential equalisation
2
3
1
1: M12 A-coded connector
2: M12 A-coded socket
3: M4 screw for potential equalisation
If the encoder (SR) is installed on machine parts with different potentials, compensation currents can
occur via the shaft.
Recommendation: Establish potential equalisation to avoid these compensation currents.
u Optionally establish the potential equalisation at the M4 screw with a cable lug.
6.7 Replacing the encoder (SR)
Observe the following points when replacing the encoder (SR):
u The replacement encoder (SR) must have the same article number as the encoder (SR) to be
replaced. Any deviations must be expressly clarified with ifm.
u The replacement encoder (SR) must be installed in accordance with the specifications and
requirements in the “Installation” chapter.
u The replacement encoder (SR) must be connected in accordance with the specifications in the
interface-specific user manual.
u As the parameters of the encoder (SR) are generally stored in the controller, the replacement
encoder (SR) is configured with the projected settings during the start-up phase.
If this mechanism is not available, it must be ensured that the replacement encoder (SR) is given
the same setting values.
u Depending on the application, the output position value may need to be adjusted to the machine
reference position. The position value must be adjusted in accordance with the programming
manual.
u When restarting the replacement encoder (SR), first ensure that it functions correctly by carrying
out a test run in real conditions.
u Organisational measures must be taken to ensure replacement of the encoder (SR) before the
bearing service life / operational life is reached.
The service life may differ from the operational life depending on the stress (→ see technical data).
Bekijk gratis de handleiding van IFM RM901S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | RM901S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1878 MB |
