IFM PG1715 handleiding
Handleiding
Je bekijkt pagina 45 van 61
Electronic manometer PG17xx
© ifm electronic gmbh 11601190 / 01 07 / 2025 45
The default settings for the display brightness in energy-saving mode and the status LED in en-
ergy-saving mode can be changed via IO-Link.
The switch to energy-saving mode may only take effect after a delay of 30 seconds.
For the setting ECO.m = OFF, the general Display brightness
49
and Status LED
50
settings apply.
11.4.9.1 Parameter setting via the device keys: Energy-saving mode
Go to EF > CFG > ECO.m.
Set ECO to activate the energy-saving mode.
Set OFF to deactivate the energy-saving mode.
11.4.10 Lock / unlock
The unit can be locked electronically to prevent unauthorised setting.
This lock prevents the settings from being changed via the keys on the unit.
Factory setting: not locked.
If the device is locked via the IO-Link interface, it can only be unlocked via IO-Link.
11.4.10.1 Parameter setting via unit keys: lock / unlock
Locking:
Make sure that the unit is in the normal operating mode.
Press
▲
+
▼
simultaneously for 10s until Loc is displayed.
The device is locked for parameter setting via the device keys. When trying to change a parameter val-
ue, the symbol Loc appears in the digital display.
The locking can only be removed via the device keys. Changing the parameter setting is still
possible via the IO-Link interface.
Unlocking:
Make sure that the unit is in the normal operating mode.
Press
▲
+
▼
simultaneously for 10s until uLoc is displayed.
The locking of the device keys is removed.
11.4.11 Reset the device
The device can be reset in two ways.
Bekijk gratis de handleiding van IFM PG1715, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PG1715 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5338 MB |
