IFM PE3026 handleiding
Handleiding
Je bekijkt pagina 16 van 32
Hysteresis:
The hysteresis keeps the switch-
ing state of the output stable if
the system pressure varies about
the preset value. When the sys-
tem pressure is rising, the output
switches when the switch-on
point has been reached (SP1);
when the system pressure is
falling again, the output switches
back when the switch-off point
(rP1) has been reached.
The hysteresis can be set: First the switch-on point is set, then the
switch-off point with the requested difference.
Window function:
The window function enables
the monitoring of a defined
acceptable range. When the sys-
tem pressure varies between the
switch-on point (SP1) and the
switch-off point (rP1), the output
is switched (window function /
NO) or not switched (window
function / NC).
The width of the window can be
set by means of the difference
between SP1 and rP1. SP1 = upper value, rP1 = lower value.
16
t
P
SP
rP
1
0
1
0
t
P
SP
rP
1
0
1
0
Hno
hysteresis
Hnc
Fno
acceptable range
Fnc
Bekijk gratis de handleiding van IFM PE3026, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PE3026 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2798 MB |
