IFM CR1213 handleiding
Handleiding
Je bekijkt pagina 7 van 22
CR1203
7
4 Installation
4.1 Mounting accessories
The unit is supplied without mounting accessories.
Depending on the intended installation location and type of mounting, the following mounting
accessories are available:
• EC0733, installation kit for panel mounting
• EC1410...EC1414, RAM® mount system for surface mounting
More information about available accessories at www.ifm.com
4.2 General installation instructions
The following applies to all types of mounting:
The responsibility for the compliance with the requirements concerning mounting of the device
in the application with regard to shock, vibration, acceleration and weight lies with the system
architect.
The unit front withstands shock up to IK07 without damage.
ATTENTION
Higher impact stress > IK07
w Damage possible
w Protection rating and electrical protection might be impaired
w Risk of injury possible
u If necessary, the system creator must take external measures to protect the device
depending on the requirements of the corresponding application.
u Replace damaged devices, otherwise the technical data and safety will be impaired.
On the back, the pressure compensation element, the service cover and the connector areas
are to be protected by taking external measures, if necessary.
4.2.1 UV protection
The device meets requirements for methods of exposure to laboratory light sources and weathering
according to DIN EN ISO 4892-2. Test criteria: Procedure A, cycle 1: Test duration 1000 h, without
affecting the functioning. The display remains legible.
Permanent outdoor use requires additional measures to protect the device from UV radiation (e.g.
shading, UV filter) in order to fulfil the expected life. When the device is not in use, it should be
covered by a sunscreen.
It is the responsibility of the system creator to check the suitability of the UV protection for the
application area of the system and, if necessary, to adapt it.
4.2.2 Location for mounting accessories
The back of the device has been prepared for fixing the mounting accessories.
Bekijk gratis de handleiding van IFM CR1213, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | CR1213 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1757 MB |
