IFM AL4042 handleiding
Handleiding
Je bekijkt pagina 38 van 58
AL4042 Remote I/O module 16 DI
38
Name Description Value range Access
[voltage_us] current voltage value of the device supply
US (value in millivolts)
e.g. 25236: 25236mV ro
1
[current_us] current value of the device supply US
(value in milliamps)
e.g. 82: 82 mA ro
1
[supervisionstatus_us] Status of the device supply US • OK: No error
• Fault: Error
ro
1
[uptime] Time since the last start of the device
(value in minutes)
• 0x0000: 0 min
…
• 0xFFFF: 65535 min
ro
1
1
Read only
Requirements:
ü IoT Core Visualizer has been started.
ü The [Processdata] menu is active.
u Select the submenu [Processdatamaster].
w Menu page shows status and diagnostic information.
9.2.5 Update firmware
The [Update] menu page allows you to update the firmware of the device:
Requirements:
ü IoT Core Visualizer has been started.
ü New firmware has been downloaded. documentation.ifm.com
u Select the [Update] menu.
w Menu page shows information about the current firmware version.
u Click on [Load software file] and select a new firmware file (*.bin).
u Click on [Update] to start the update process.
w The firmware of the device is updated.
w The progress of the update process is displayed.
w After successful update: The device reboots automatically.
Bekijk gratis de handleiding van IFM AL4042, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4042 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4907 MB |
