IFM AL4033 handleiding
Handleiding
Je bekijkt pagina 26 van 61

AL4033 Remote I/O module 16 DI
26
9.1.3.4 Reading the firmware version
Available information:
Name Description Value range Access
[version] Firmware version AL4x3x_fw_ec_1.4.0.147? ro
1
[type] Type • firmware: Firmware type ro
1
1
Read only
Requirements:
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select [Firmware] submenu.
w The menu page shows available information.
9.1.3.5 Setting the application tag
Available parameters:
Name Description Value range Access
[applicationtag] Designation of the unit in the monitoring
software
e.g. “factory 2 plant 1” rw
1
1
Read and write
32 bytes are available on the device for storing the applicationtag parameter. If the memory
range is exceeded, the device will abort the write process (diagnostic code 400).
u When writing the applicationtag parameter, observe the different memory requirements
of the individual UTF-8 characters (characters 0-127: 1 byte per character; character >127:
more than 1 byte per character).
Requirements:
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select the [Devicetag] submenu.
w The menu page shows the current settings.
u Enter the application identifier.
u Click on to save the changes to the device.
w New application identifier is set.
9.1.4 Accessing the process data
The [Processdata] menu page provides access to the process data of the device.
Requirements:
ü IoT Core Visualizer has been started.
u Select the [Processdata] menu.
w The menu page shows the substructures of the device description that contains the process data.
w The current process values are displayed.
Bekijk gratis de handleiding van IFM AL4033, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | IFM |
Model | AL4033 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3248 MB |