IFM AL4033 handleiding
Handleiding
Je bekijkt pagina 24 van 61
AL4033 Remote I/O module 16 DI
24
Name Description Value range Access
[pin4] > [hold_time] Pin 4: hold time (= value * 0.1milliseconds) • 0: 0ms (default)
…
• 60000: 6000 ms
rw
1
[pin4] > [hold_level] Pin 4: hold level • Low: hold LOW
• High: hold HIGH (default)
rw
1
[pin4] > [invert] Pin 4: inversion • Signal not inverted: do not invert
(default)
• Signal inverted: invert
rw
1
1
The parameter can only be changed if no connection to the fieldbus controller is active
Requirements:
ü The device is in the EtherCAT operating mode PRE-OPERATIONAL or SAFE-OPERATIONAL.
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select the [io] > [port[n]] submenu (n: 1...8).
w The menu page shows the current settings.
u Set the parameters.
u Click on to save the changes to the device.
w The filters of the digital inputs are configured.
9.1.3.2 Configuring counter modules
u Observe the notes on counter modules: Counter (Ò/10)
If the operating mode of a counter module is changed, the current counter values will be reset
and any active events will be deleted.
For the parameters [pin2_function] and [count_direction_selection] all shown parameter values can be
selected. It is not checked whether these make sense. For each counter operating mode (parameter
[mode]), the table below indicates the valid value ranges (: valid setting; : invalid setting):
[mode]
[pin2_function] [count_direction_selection]
No function
Counting
pulse
Counting di-
rection
Reset main
counter and
batch coun-
ter
Disable main
counter and
batch coun-
ter
Pin 2
IoT Core /
Fieldbus
PLC
CTU
CTD
CTUD
CTDIR
CTDIR
Available parameters:
Name Description Value range Access
[mode] Operating mode of the counter module • CTU (up counter): up counter
(default)
• CTD (down counter): Down counter
• CTUD (up counter/ down counter):
up and down counter
• CTDIR (direction counter): up and
down counter with selectable
counting direction
rw
1
Bekijk gratis de handleiding van IFM AL4033, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4033 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3248 MB |
